 |
Nonporous Teflon Certified Glass
Nonporous Teflon Certified Glass
|
 |
Cordless Electric Cutter
For Aramid Fibers, Kevlarฎ and other tough fabrics:
-
Superior ergonomic design
-
Requires much less effort to use than cutting manually
-
Light weight and maneuverable
-
Rechargeable long lasting battery
-
No cord to worry about
-
Carbide insert blades for longer wear
-
Can be operated with cord and battery adapter (supplied) for unlimited cutting time
-
Short rapid strokes for intricate work
-
Not recommended for material over 1/8 inch thick due to short stroke
Kit comes with:
-
Shoe Blade
-
Rechargable DC battery
-
AC Adapter
-
Charger Transformer with Power Cord
|
 |
Multi-Purpose Composite Shears
Stainless steel blades bonded to a high-impact black nylon frame
Knife edge cutting blade for extra sharpness
Serrated integral blade assures a firm grip on slippery synthetics
An excellent choice for lay-up work
Easily cleaned with acetone
Keep one pair for cutting Kevlar or fiberglass and a second pair for other materials
|
 |
Aramid Shears
These shears were developed specifically for cutting aramid fabrics. It uses a wear resistant surface coating that will not chip or flake off. They have an estimated life of ten times that of uncoated shears, and can be resharpened if required.
|
 |
Spring-Loaded Composite Shears
ACP's Spring-Loaded Composite Shears are ideal for hard-to-cut aramid, graphite, carbon and fiberglass fabrics used in the reinforced composites industry today. The steel blades grip dry fabrics and prepregs allowing easy precision cutting and trimming.
Low cost
4.25 ounces overall weight
2.25 inch spring loaded steel blade
7.5 inch overall length
Plastic handles inert to most shop solvents
Thumb activated safety lock
Resharpenable
|
 |
Left-Handed Composite Shears
|
 |
Rotary Cutter - Heavy Duty
An industrial style cutter with a 3 " diameter rotary cutter. The most convenient way we have found to cut fiberglass cloth. Leaves a very sharp cut with very few frayed edges. When glassing foam wings during vacuum bagging, the glass can easily be cut by using the Mylar as a template and running the rotary cutter around the Mylar to trim the glass.
Extra blade included
Replacement blades are available
|
 |
Rotary Cutter Blade - Replacement
|
 |
Epoxy Mixing Boats
Made of flexible polystyrene, they are used for mixing Part A and Part B of EZ-LAM epoxy. Wide lip allows assured grip surface for handling. Dishes bend easily for pouring to ensure a non-spill transfer of the resin.
6 per package
|
 |
Epoxy Mixing Cups
4 Oz. clear plastic graduated mixing containers with covers. The mixing cups are reusable as long as the resin and hardener are not mixed together in them.
4 per package
Caps included
|
 |
Mixing Sticks
Wooden paddlesticks with rounded ends. Perfect for mixing EZ Lam Epoxy in mixing cup.
|
 |
Vinyl Surgical Gloves
These vinyl gloves are lightweight, thin, seamless and disposable. They will not allow epoxy resin to penetrate.
4 pair per package
|
 |
Acid Brushes
Disposable, 3/8" wide nylon bristle brushes with metal handles. Use when applying epoxy in tight corners or small areas.
6 per package
|
 |
China Brush
1" wide disposable brushes for the application of EZ-Lam resin during the vacuum bagging or laminating process.
|
 |
Epoxy Roller Kit
These 3 " wide rollers were specifically designed for use with epoxy resin. They have a phenolic core that will not deteriorate when wetted with the epoxy and a textured surface that enhances the wet-out of the fabrics. Kit includes a professional handle, and two rollers.
Replacement rollers available.
|
 |
Epoxy Roller Cover
Replacement cover for epoxy roller.
|
 |
Epoxy Spreader
4" wide flexible plastic epoxy applicators. Use to evenly spread epoxy on fabric, and to squegee off excess resin. A must for any composite project!
|
 |
Flashbreaker Tape
A blue polyester linered tape with a silicone adhesive for use as a flashbreaker tape in composite bonding as well as in composite bagging operations.
72 yard roll
|
 |
Tungsten Carbide Rod Saw
A thin tough alloy steel wire coated with carbide grit. It can be used in a 10" coping saw or hacksaw to cut all types of composite laminates easily by hand.
|
 |
Tungsten Carbide Saber Saw
1/4" shank saber saw blade that uses thousands of tiny tungsten carbide particles bonded to the cutting surface to obtain a superior cutting edge that will easily cut all composite materials. These blades are recommended for cutting ACP's graphite or glass faced end-grain balsa panels. Unlike a band saw blade, these blades leave an exceptionally smooth cut and will not snag the bottom laminate.
|
