|
ACP Composites Inc. :: NEW! Carbon Fiber: High Gloss Woven Sheet
ACP’s proprietary AutoClave curing
process produces the most consistent and highest quality gloss carbon fiber
laminates possible.
These laminates are cured at a high temperature and
pressure. Unlike vacuum bagging, which only generates a maximum of 14
psi, ACP’s AutoClave process cures laminates at 100 psi and 275º F.
ACP's high gloss panel is an
outstanding decorative laminate with a deep, glossy, three dimensional
finish. These 1st quality panels are manufactured with a clear, resin-rich
carbon prepreg resulting in a smooth, low porosity laminate with a mirror-like
finish. A clear coat is not necessary to enhance the surface appearance
of this laminate.
All High Gloss Twill Carbon Fiber Sheets have the following tolerances:
Thickness: +/- .005"
Length/Width: +/- .025"
Custom High Gloss Carbon Sheets available - please submit a request through "Contact Us" or call directly
| NEW! Carbon Fiber: High Gloss Woven Sheet |
 |
.008" (.2 MM) High Gloss Twill Carbon Fiber Sheet
- Single ply of 2x2 Twill Carbon Fiber
- Gloss one side only, flat matte finish on opposite side
|
 |
.020" (.5 MM) High Gloss Twill Carbon Fiber Sheet
- Gloss one side only, bondable roughened surface on opposite side
- 100% carbon fiber core
|
 |
.039" (1 MM) High Gloss Twill Carbon Fiber Sheet
- Gloss one side only, bondable roughened surface on opposite side
- 100% carbon fiber core - 0/90 unidirectional layup
|
 |
.059" (1.5 MM) High Gloss Twill Carbon Fiber Sheet
- Gloss one side only, bondable roughened surface on opposite side
- 100% carbon fiber core - 0/90 unidirectional layup
|
 |
.078" (2 MM) High Gloss Twill Carbon Fiber Sheet
- Gloss one side only, bondable roughened surface on opposite side
- 100% carbon fiber core - 0/90 unidirectional layup
|
 |
.118" (3 MM) High Gloss Twill Carbon Fiber Sheet
- Gloss one side only, bondable roughened surface on opposite side
- 100% carbon fiber core - 0/90 unidirectional layup
|
 |
.157" (4 MM) High Gloss Twill Carbon Fiber Sheet
- Gloss one side only, bondable roughened surface on opposite side
- 100% carbon fiber core - 0/90 unidirectional layup
|
|
|
|
|
